DC SCISSOR LIFTS – ANSI/SAIA CHANGES
04/14/2020
With the publication of the new ANSI/SAIA regulations for Mobile Elevating Work Platforms (MEWPs), there are many changes to the DC Electric Powered scissor lifts.
Tilt Switch Locations
09/20/2019
Skyjack Vertical Mast Lifts, Compact and Conventional Electric Scissor Lifts, and Boom Lifts are equipped with a Tilt Switch as standard equipment.
Motor Controller
05/15/2019
With the incorporation of a Motor Controller to the Skyjack Vertical Mast and SJIII DC Electric Scissor Lifts, several things are different from the Hydraulic Proportional units.
USB Flash Drive
12/29/2018
The USB Flash Drive that is available from our parts department contains the current Service and Parts manuals.
On-Board Diagnostic Display
10/23/2018
The SJ30 AJE/ARJE and SJ6832 RTE models use a motor controller system for function operation
MODULAR KEY SWITCHES
07/11/2018
It's important to use the correct switch blocks and key operator parts
MOTOR CONTROLLER UNITS: CONTACTOR DIODE
05/15/2018
Skyjack electric scissor lifts and vertical mast units both use a Motor Controller to regulate the speed of functions.
Manual Storage Box
02/20/2018
All Skyjack mobile elevating work platforms are equipped with a manual storage box.
3 things to remember!
12/14/2017
The new Deutz engines with the common rail-electronic injection system will not allow the starter to crank if the fuel pump does not operate.
OCTOBER 2017
10/12/2017
Skyjack electric scissor models that use a Motor Controller – the units labeled as MC